400i PVC Digital Fume Extractor

This machine can cater for:

This is a specialist machine for laser processing of PVC

400i PVC Digital Fume Extractor

Build Machine


All machines are available in a variety of voltages to cater for different regions of the world.

  • 230V

  • 120V


Digital machines come with the choice of vacuum or volume sensing. Vacuum sensing is for tip and arm applications. Volume sensing is for laser and machine processing  

  • Volume 

  • Vacuum

Main Filters

A variety of different combinations of filter media are used in Purex filters depending on the application. Air equalisation plates are used between the layers of media to further reinforce the filter housing and to distribute the airflow across the filter to ensure all of the filter media is used.

  • HEPA/PVC Chemical Filter [113498]

Power Cables & Plugs

Purex machines are supplied with a choice of power cables and plugs for use in different areas of the world. Please note that 1500i, 2000i and 5000i machines are supplied with a factory fitted 5m long cable without a plug. These should be connected to a suitable power supply on site by a qualified electrician.

  • Power Cable (5m) Australia [410164]

  • Power Cable (5m) Europe [410163]

  • Power Cable (5m) No Plug [410165]

  • Power Cable (5m) UK [410162]

  • Power Cable (5m) USA/Asia 120V [410160]

  • Power Cable (5m) USA/Asia 230V [410161]


  • Voltage (V) 230 (120)

  • Frequency (Hz) 50/60

  • Wattage (kW) 1.2 (1.1)

  • Length (mm) 465

  • Width (mm) 528

  • Height (mm) 1181

  • Weight (Kg) 70


Pre-filters are designed to capture larger particles before they can enter the main HEPA filter. Without pre-filters, the life of the main filter would be much shorter. A variety of media and designs are available to allow Purex extractors to be used in a wide range of processes.

  • Pre-Filter Pad F5 [202260]

  • Labyrinth F8/F9 Composite [202271]

Coding & Marking Connection Kits

These kits contain a variety of flexible hoses, reducers, clips and other fixings to connect a Purex fume extractor to a coding and marking laser or a continuous inkjet (CIJ) printer.

  • 51mm Twin Head Coding Kit [100039]

  • 51mm Single Head Coding Kit (PVC) [100043C]

Machine Interfacing Kits

Your Purex machine can control or be controlled by another machine such as a laser or reflow oven. Options include Remote ON/OFF and filter blocked warning signals. These cables connect the fume extractor to other equipment.

The cables have an 8 pin Lumberg Connector (picture right) which plugs into the Purex machine. The connector on the other end of the cable can be one of the following...

  • None

  • 4 Way Mini Bulgin [105097]

  • 5 Way XLR Neutric [105105]

  • 6 Way Bulgin [105103]

  • 9 Way D-type (female) [105106]

  • 9 Way D-type (male) [105107]

  • 9 Way D-type (male no volt) [105104]

  • 6 Way Lumberg [105096]

  • 7 Way Lumberg [105098]

  • Bare Wire Cable [105108]


  • Automatic electronic flow control - maintains a constant extraction rate even as the filter blocks

  • Speed control (adjustable airflow) 

  • Clear and informative graphic display 

  • Gas sensor and particle sensor on the exhaust 

  • Low capital and running costs 

  • Quick change pre-filter delivers longer filter life 

  • Submicronic (HEPA Filter) filtration removes 99.997% of particles down to 0.3 microns 

  • Activated Carbon Filters removes harmful gas 

  • Simple to install and quiet in operation 

  • Easy to relocate and precision made from stainless steel

  • Optional interfacing option